2-7
Chapter 2. NAMES & FUNCTIONS OF PARTS
Category
Program setup
Program copy
General reset
Function
To start program setup (programming)
(in basic display state)
To move between program items and segment Nos.
To start changing of item setting values
(while setting value is blinking)
To end changing of item setting values
(while setting value is blinking)
To change item setting values
(while setting value is blinking)
To clear item setting
(while setting value is blinking)
To cancel changing item setting values
(while setting value is blinking)
To insert/delete segments
To change the program No. in ascending order
To change the program No. in descending order
To end program setup (programming)
To start program copy
(in basic display state)
To change the copy destination program No.
To execute program copy
(while setting value is blinking)
To end program copy
To check general reset
(in basic display state)
To execute general reset
To cancel general reset
Key operation
FUNC + PROG
↑ ↓ ← →
ENT
↑ ↓ ← →
FUNC + CLR
DISP
FUNC + ENT
FUNC + PROG
FUNC +
↓
DISP
↑
+ PROG
↑ ↓
ENT
DISP
FUNC + CLR +
DISP
ENT
DISP
■
Combined key operations
FUNC + DISP
: Displayed channel switching keys
Press the
DISP
key with the
FUNC
key held down in the basic
display state to switch the displayed channel.
PROG + RUN/HOLD
: Reset keys
Press the
RUN/HOLD
key with the
PROG
key held down in the
basic display state to reset the DCP32.
The DCP32 enters the READY mode from the RUN, HOLD,
FAST or END modes.
The DCP32 cannot be reset in the READY mode by key operation.
PROG + DISP
: Advance keys
Press the
DISP
key with the
PROG
key held down in the program
operation mode in the basic display state to advance the program.
In the RUN, HOLD or FAST modes, the program advances to the
next segment.
The DCP32 cannot advance in the READY mode by key operation.
FUNC +
→
: Fast keys
Press
→
with the
FUNC
key held down in the program operation
mode in the basic display state to fast-operate the program.
The DCP32 enters the FAST mode from the RUN or HOLD
modes.
