94
En
Saving and recalling the system settings (SYSTEM MEMORY)
4
Press
3
l
/
h
repeatedly to select the
desired memory number (“MEMORY1” to
“MEMORY6”).
y
• If system settings are already stored in the selected
memory number, the stored system parameter settings
appear in the menu screen. “EMPTY” appears in the menu
screen if no system settings are stored in the selected
memory number.
• If system settings are already saved in the selected
memory number, this unit overwrite the old system
settings.
• If you save the system settings to “MEMORY1” to
“MEMORY4”, you can load the stored settings by
pressing the corresponding
M
SYSTEM MEMORY
buttons (see page 94).
5
Press
3
ENTER
to save the current system
settings to the selected memory number.
6
Press
F
SET MENU
again to exit from “SET
MENU”.
■
Loading by the
M
SYSTEM MEMORY
buttons
You can recall the system settings stored in “MEMORY1”
to “MEMORY4” by pressing the corresponding
M
SYSTEM MEMORY
buttons.
1
Press one of the
M
SYSTEM MEMORY
buttons on the remote control to select the
desired memory number.
“MEMORY 1 LOAD” (example) appears in the front
panel display.
y
“EMPTY” appears in the menu screen if no system settings
are stored in the selected memory number.
2
Press the selected
M
SYSTEM MEMORY
button once more to confirm the selection.
This unit loads the settings stored in the selected
memory number.
■
Loading by the SET MENU operation
1
Press
F
SET MENU
on the remote control.
The top “SET MENU” display appears in the OSD.
2
Press
3
n
to select “SYSTEM MEMORY” and
then press
3
ENTER
.
The “SYSTEM MEMORY” menu appears in the
OSD.
3
Press
3
ENTER
to select “LOAD”.
The following menu appears in the OSD.
4
Press
3
l
/
h
repeatedly to select the
desired memory number where the system
settings are stored and then press
3
ENTER
.
This unit loads the selected system settings.
5
Press
F
SET MENU
to exit from “SET
MENU”.
Loading the stored system settings
• Before performing the following operations, set the
operation mode selector on the remote control to
C
AMP
.
• This unit overwrites the stored settings to the current
settings of this unit. If you do not want to erase the current
settings, save the current settings to any SYSTEM
MEMORY number in advance.
[
p
]/[
[
]:
[ENTER]:
SYSTEM MEMORY
SAVE
;;;;;;;
MEMORY1
Drama
ADAPTIVE DRC
;;
AUTO
EQUALIZER
;;;;;;
GEQ
YPAO PEQ
;;;;;;
NONE
Select
Return
.
Stored system parameters in the
selected memory number
4
3
2
1
SYSTEM MEMORY
[
p
]/[
[
]:
[ENTER]:
SYSTEM MEMORY
LOAD
;;;;;;;
CURRENT
Church in Freiburg
ADAPTIVE DRC
;;
AUTO
EQUALIZER
;;;;;;
PEQ
YPAO PEQ
;;;
NATURAL
Select
Return
.
[
p
]/[
[
]:
[ENTER]:
SYSTEM MEMORY
LOAD
;;;;;;;
MEMORY6
Straight
ADAPTIVE DRC
;;
AUTO
EQUALIZER
;;;;;;
PEQ
YPAO PEQ
;;;;;;
FLAT
Select
Load
.
