72
En
You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening
environment.
■
Auto setup
AUTO SETUP
Use this feature to automatically adjust speaker and system parameters (see page 37).
■
Manual setup
MANUAL SETUP
Use this feature to manually adjust speaker and system parameters.
Basic menu
1 BASIC MENU
Customizing this unit (MANUAL SETUP)
Menu
Parameter
Functions
Page
A)SPEAKER SET
LFE/BASS OUT
Selects the speakers that output the LFE (low-frequency effect) and the
low-frequency signals.
FRONT SP
Selects the size of the front speakers.
CENTER SP
Selects the size of the center speaker.
SUR. L/R SP
Selects the size and number of the surround speakers.
SUR.B L/R SP
Selects the size and number of the surround back speakers.
PRESENCE SP
Selects whether this unit uses the presence speakers.
CROSS OVER
Selects the crossover frequency of all the speakers set to “SML” (or
“SMALL”) or to “NONE” in “SPEAKER SET” (see pages 77 and
78).
SUBWOOFER PHASE
Switches the phase of your subwoofer if bass sounds are lacking or
unclear.
PRIORITY
Prioritizes either the presence or the surround back speakers when
playing back sources that contain surround back channel signals using
the CINEMA DSP sound field programs.
B)SPEAKER LEVEL
FR.L/FR.R/
CENT./SUR.L/
SUR.R/SB L/SB R/
SWFR/PR.L/PR.R
Adjust the balance the speaker levels between the front left or
surround left speakers and each speaker selected in “SPEAKER SET”
(see page 77).
C)SP DISTANCE
UNIT
Selects the unit to adjust the speaker distance.
FRONT L/FRONT R/
CENTER/SUR. L/
SUR. R/SB L/SB
R/SWFR/PRNS L/
PRNS R
Adjust the distance of each speaker and the delay applied to the
respective channel.
D)TEST TONE
—
Turns the test tone output on or off for the “SPEAKER SET”,
“SPEAKER LEVEL”, and “SP DISTANCE” settings.