Yamaha FJR13AG, Руководство по обслуживанию

Страница: 703 / 784

GRIP WARMER SYSTEM
8-226
The grip warmers are abnormally hot while the engine is idling.
NG
→
OK
↓
The grip warmers do not become very warm while the vehicle is traveling.
NG
→
OK
↓
NG
→
OK
↓
The temperature levels of the grip warmer settings cannot be changed.
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
1. Check that the temperature level of
the low grip warmer setting is set to
“1”.
Adjust the temperature levels of the grip
warmer settings.
Replace the ECU. Refer to “REPLAC-
ING THE ECU (engine control unit)”
on page 8-250.
1. Check that the temperature level of
the high grip warmer setting is set
to “10”.
Adjust the temperature levels of the grip
warmer settings.
2. Check that the engine trouble warn-
ing light is on and that fault code
No. P0500 is displayed in the
Yamaha diagnostic tool display.
Perform the troubleshooting for fault code
No. P0500. Refer to “TROUBLESHOOT-
ING DETAILS (ECU) (FAULT CODE)” on
page 8-62.
Replace the ECU. Refer to “REPLAC-
ING THE ECU (engine control unit)”
on page 8-250.
1. Check the menu switch.
Refer to “CHECKING THE
SWITCHES” on page 8-247.
• The menu switch is faulty.
• Replace the left handlebar switch.
2. Check the select switch.
Refer to “CHECKING THE
SWITCHES” on page 8-247.
• The select switch is faulty.
• Replace the left handlebar switch.
3. Check the wire harness between
the left handlebar switch and the
meter assembly.
Properly connect or replace the wiring har-
ness.
Replace the meter assembly.