Yamaha FJR13AG, Руководство по обслуживанию

Страница: 630 / 784

CRUISE CONTROL SYSTEM
8-153
B-1 Locate the malfunction. Execute the diagnostic mode.
(Code 80)
When the cruise control setting
switch “RES+” is pushed: “ON”
When the cruise control setting
switch is released: “OFF” Malfunction
→
Go to item A-2
for the cruise control setting
switch “RES+”.
Execute the diagnostic mode.
(Code 81)
When the cruise control setting
switch “SET–” is pushed: “ON”
When the cruise control setting
switch is released: “OFF” Malfunction
→
Go to item B-2.
B-2 Connection of left handlebar
switch coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins). Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Turn the main switch to “ON”.
Push and “SET–” side of the
cruise control setting switch,
and then check the condition of
the fault code using the mal-
function mode of the Yamaha
diagnostic tool.
Condition is “Recovered”
→
Go
to item B-9 and finish the ser-
vice.
Condition is “Detected”
→
Go to
item B-3.
B-3 Connection of main switch cou-
pler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins). Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Turn the main switch to “ON”.
Push and “SET–” side of the
cruise control setting switch,
and then check the condition of
the fault code using the mal-
function mode of the Yamaha
diagnostic tool.
Condition is “Recovered”
→
Go
to item B-9 and finish the ser-
vice.
Condition is “Detected”
→
Go to
item B-4.
B-4 Connection of ECU coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins). Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Turn the main switch to “ON”.
Push and “SET–” side of the
cruise control setting switch,
and then check the condition of
the fault code using the mal-
function mode of the Yamaha
diagnostic tool.
Condition is “Recovered”
→
Go
to item B-9 and finish the ser-
vice.
Condition is “Detected”
→
Go to
item B-5.
Fault code No. P0564
Item
A
Cruise control setting switch “RES+”: open or short circuit is de-
tected.
B
Cruise control setting switch “SET–”: open or short circuit is de-
tected.