Yamaha FJR13AG, Руководство по обслуживанию

Страница: 623 / 784

CRUISE CONTROL SYSTEM
8-146
Procedure Operate the brake lever.
Item
Probable cause of malfunc-
tion and check
Maintenance job
Confirmation of service com-
pletion
A-1 Locate the malfunction. Execute the diagnostic mode.
(Code 82, 83)
When the front brake is applied:
“ON”
When the front brake is not ap-
plied: “OFF” Malfunction
→
Go to item A-2.
When the rear brake is applied:
“ON”
When the rear brake is not ap-
plied: “OFF” Malfunction
→
Go to item B-2
for the rear brake light switch.
A-2 Connection of front brake light
switch coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins). Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Turn the main switch to “ON”.
Operate the brake lever, and
then check the condition of the
fault code using the malfunction
mode of the Yamaha diagnostic
tool.
Condition is “Recovered”
→
Go
to item A-10 and finish the ser-
vice.
Condition is “Detected”
→
Go to
item A-3.
A-3 Connection of brake switch re-
lay coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins). Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Turn the main switch to “ON”.
Operate the brake lever, and
then check the condition of the
fault code using the malfunction
mode of the Yamaha diagnostic
tool.
Condition is “Recovered”
→
Go
to item A-10 and finish the ser-
vice.
Condition is “Detected”
→
Go to
item A-4.
A-4 Connection of main switch cou-
pler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins). Improperly connected
→
Con-
nect the coupler securely or re-
place the wire harness.
Turn the main switch to “ON”.
Operate the brake lever, and
then check the condition of the
fault code using the malfunction
mode of the Yamaha diagnostic
tool.
Condition is “Recovered”
→
Go
to item A-10 and finish the ser-
vice.
Condition is “Detected”
→
Go to
item A-5.
Fault code No. P056C
Item
A Front brake light switch: open or short circuit is detected.
B Rear brake light switch: open or short circuit is detected.