Yamaha FJR13AG, Руководство по обслуживанию

Страница: 762 / 784

SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
(ECU)
9-17
60 EEPROM fault code display
• No history 00
• No malfunctions detected
(If the self-diagnosis fault
code P062F is indicated,
the ECU is defective.)
—
• History exists
Display the EEPROM writ-
ing error for fault code No.
P062F.
If more than one item is de-
fective, the displays alter-
nates every two seconds to
show all the detected num-
bers.
01–04 (CO adjustment val-
ue)
• (If more than one cylinder is
defective, the display alter-
nates every two seconds to
show all the detected cylin-
der numbers.
When all cylinder numbers
are shown, the display re-
peats the same process.)
—
11 (Data error for ISC (idle
speed control) learning val-
ues)
12 (O
2
feedback learning val-
ue)
13 (OBD memory value)
67 ISC (idle speed control)
learning condition display
ISC (idle speed control)
learning data erasure 00
ISC (idle speed control)
learning data has been
erased.
01
It is not necessary to erase
the ISC (idle speed control)
learning data.
02
It is necessary to erase the
ISC (idle speed control)
learning data. To erase the ISC (idle speed
control) learning data, set the
start/engine stop switch from
“
” to “ ” 3 times in 5 sec-
onds.
70 Control number 0–254 [-] —
80 Cruise control setting switch
“RES+” Push and release the
“RES+” side of the cruise
control setting switch.
• Switch is pushed ON
• Switch is released OFF
81 Cruise control setting switch
“SET–” Push and release the “SET–”
side of the cruise control set-
ting switch.
• Switch is pushed ON
• Switch is released OFF
Diagnostic
code No.
Item Tool display Procedure