ABS (ANTI-LOCK BRAKE SYSTEM)
8-215
Fault code No. ABS_53
Fault code No. ABS_54
Fault code No. ABS_56
Fault code No.
ABS_53
Symptom
Power voltage is too low.
Order Item/components and probable cause
Check or maintenance job
1
Battery voltage
Recharge or replace the battery.
Refer to “CHECKING AND CHARGING THE BATTERY”
on page 8-251.
2
Connections
• ABS ECU coupler
• Check the coupler for any pins that may be pulled out.
• Check the locking condition of the coupler.
• If there is a malfunction, replace the wire harness and
connect the coupler securely.
TIP
Turn the main switch to “OFF” before disconnecting or
connecting a coupler.
3
Open or short circuit in wire harness.
• Replace if there is an open or short circuit.
• Between ABS ECU coupler and ABS ECU fuse.
(brown/white–brown/white)
4
Charging system
Check the charging system.
Refer to “CHARGING SYSTEM” on page 8-17.
Fault code No.
ABS_54
Symptom
Power voltage is too low.
Order Item/components and probable cause
Check or maintenance job
1
Battery voltage
Recharge or replace the battery.
Refer to “CHECKING AND CHARGING THE BATTERY”
on page 8-251.
2
Connections
• ABS ECU coupler
• Starter relay coupler
• Check the coupler for any pins that may be pulled out.
• Check the locking condition of the coupler.
• If there is a malfunction, replace the wire harness and
connect the coupler securely.
TIP
Turn the main switch to “OFF” before disconnecting or
connecting a coupler.
3
Open or short circuit in wire harness.
• Replace if there is an open or short circuit.
• Between ABS ECU coupler and ABS ECU fuse.
(brown/white–brown/white)
• Between ABS ECU coupler and ABS solenoid fuse.
(red/white–red/white)
• Between ABS ECU coupler and joint coupler.
(blue/white–blue/white)
• Between joint coupler and starter relay coupler.
(blue/white–blue/white)
4
Charging system
Check the charging system.
Refer to “CHARGING SYSTEM” on page 8-17.
Fault code No.
ABS_56
Symptom
Hydraulic unit sensor power monitor circuit is abnor-
mal.
Order Item/components and probable cause
Check or maintenance job
1
Defective internal monitor circuit (sensor
power).
Replace the hydraulic unit assembly.
Содержание FJR13AG
