Yamaha FJR13AG, Руководство по обслуживанию

Страница: 627 / 784

CRUISE CONTROL SYSTEM
8-150
Fault code No. P0564
B-8 Defective rear brake light
switch. Replace the rear brake light
switch. Turn the main switch to “ON”.
Operate the brake pedal, and
then check the condition of the
fault code using the malfunction
mode of the Yamaha diagnostic
tool.
Condition is “Recovered”
→
Go
to item B-10 and finish the ser-
vice.
Condition is “Detected”
→
Go to
item B-9.
B-9 Malfunction in ECU. Replace the ECU.
Refer to “REPLACING THE
ECU (engine control unit)” on
page 8-250.
B-10 Delete the fault code and check
that the engine trouble warning
light goes off. Confirm that the fault code has
a condition of “Recovered” us-
ing the Yamaha diagnostic tool,
and then delete the fault code.
Fault code No. P056C
Item
A Front brake light switch: open or short circuit is detected.
B Rear brake light switch: open or short circuit is detected.
Fault code No. P0564
Item
A
Cruise control setting switch “RES+”: open or short circuit is de-
tected.
B
Cruise control setting switch “SET–”: open or short circuit is de-
tected.
Fail-safe system
Able to start engine
Able to drive vehicle
Diagnostic code No. 80, 81
Tool display
“ON” (when the switch is pushed)
“OFF” (when the switch is released)
Procedure Push and release the “RES+” side of the cruise control setting switch.
Item
Probable cause of malfunc-
tion and check
Maintenance job
Confirmation of service com-
pletion
A-1 Locate the malfunction. Execute the diagnostic mode.
(Code 80)
When the cruise control setting
switch “RES+” is pushed: “ON”
When the cruise control setting
switch is released: “OFF” Malfunction
→
Go to item A-2.
Execute the diagnostic mode.
(Code 81)
When the cruise control setting
switch “SET–” is pushed: “ON”
When the cruise control setting
switch is released: “OFF” Malfunction
→
Go to item B-2
for the cruise control setting
switch “SET–”.