Yamaha F30A 2018, Руководство по обслуживанию

Страница: 57 / 348

3-7
Rigging grommet mounting
h. Tighten the shift cable locknut “4” from its
fully seated position to the specified angle.
i. Fully screw in the throttle cable joint “1” to
the throttle cable “2”.
j. Check that the throttle control lever “1”
contacts the stopper “2”.
k. Align the protrusion “a” on the throttle lever
“1” with the protrusion “b” on the shift
bracket “2”.
l. Pull the inner cable “3” using the force of
15 N (1.5 kgf, 3.4 lbf) to remove any free
play in the cable.
m. Adjust the throttle cable joint “4”, and then
install it to the pin “5” of the throttle lever.
The throttle cable joint must be screwed in
8 .0 mm (0. 3 1 in) or more.
n. Install the clip “1”, and then check that the
throttle cable locknut “2” is fully seated on
the throttle cable joint “3”.
o. Tighten the throttle cable locknut “2” from
its fully seated position to the specified an-
gle.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Dimension “a”
8.0 mm (0.31 in) or more
Shift cable locknut “4”
90

2
1
3
a
4
1
T
R
.
.
2
1
2
1
Dimension “c”
8.0 mm (0.31 in) or more
Throttle cable locknut “2”
90

2
4
1
b
b
a
a
5
c
4
3
1
2
3
T
R
.
.