Yamaha F30A 2018, Руководство по обслуживанию

Страница: 269 / 348

9-9
Electrical component (tiller handle)
Assembling the electrical component
1. Assemble:
• Electrical component
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install the engine start switch “1” so that
the hole “a” is facing up, and then tighten
the engine start switch nut “2” to the spec-
ified torque.
b. Pass the extension wire harness “3”, alert
indicator harness “4”, and trolling switch
lead “5” through the grommet “6”, and then
install them.
c. Connect the engine start switch coupler
“b”.
d. Install the engine shut-off switch “7”, and
then tighten the engine shut-off switch nut
“8” to the specified torque.
e. Connect the engine shut-off switch con-
nectors “c”
f. Install the buzzer “9”, and then connect the
buzzer connectors “d”.
g. Align the white tapes “a” on the extension
wire harness “1” and alert indicator har-
ness “2” with the inner end of the grommet
“3”.
h. Install the alert indicator “1”, and then tight-
en the alert indicator screws “2” to the
specified torque.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Engine start switch nut “2”
4.4 N·m (0.44 kgf·m, 3.2 lb·ft)
Engine shut-off switch nut “8”
2.3 N·m (0.23 kgf·m, 1.7 lb·ft)
2
9
d
7
3
b
6
1
a
8
c
4
5
3
4
5
T
R
.
.
Alert indicator screw “2”
1.8 N·m (0.18 kgf·m, 1.3 lb·ft)
2
a
3
1
2
2
1
T
R
.
.