Yamaha F30A 2018, Руководство по обслуживанию

Страница: 236 / 348

8-16
Drive shaft and lower case
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Install:
• Needle bearing “1” (in the lower
case)
TIP:
• Face the bearing identification mark “a” on
the needle bearing up.
• When using the driver rod, do not strike the
special service tool in a manner that will force
the stopper “c” out of place.
• Mark the driver handle at the specified instal-
lation depth “b” with an identification mark “d”,
and then install the needle bearing to the
specified installation depth. Make sure to
measure the depth on the driver handle from
the flange bottom of the special service tool
“5”.
A. Worldwide
B. USA and Canada
Driver rod LL “1”
90890-06605
Bearing outer race attachment “2”
90890-06622
Driver handle (large) “3”
YB-06071
Forward gear outer race installer
“4”
YB-41446
3
3
4
4
B
New
A. Worldwide
B. USA and Canada
Driver rod SL “2”
90890-06602
Needle bearing attachment “3”
90890-06614
Bearing depth plate “4”
90890-06603
Driver handle (large) “5”
YB-06071
Driveshaft needle bearing remov-
er and installer “6”
YB-06063
Installation depth “b”
182.5–183.0 mm (7.19–7.20 in)
1
2
3
4
2
3
a
b
c
A
1
5
6
5
6
a
b
d
B