Yamaha F30A 2018, Руководство по обслуживанию

Страница: 321 / 348

10-16
General periodic maintenance
1. Warm up:
• Engine
See step 1 in “Changing the engine oil us-
ing an oil changer” (10-14).
2. Remove:
• Top cowling
3. Drain:
• Engine oil
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the oil filler cap “1”.
b. Place a drain pan “1” under the engine oil
drain hole.
c. Remove the drain bolt “2”.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
4. Install:
• Gasket “1”
• Drain bolt “2”
5. Fill:
• Recommended engine oil
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Fill the engine with the specified amount of
the recommended engine oil through the
oil filler hole. Install the oil filler cap.
Do not overfill the engine with engine oil.
Otherwise, the engine could be damaged or
oil could leak. If the engine oil is above the
upper level, extract the excess engine oil
until the oil is at the proper level.
b. Leave the outboard motor off for 5–10 min-
utes.
c. Remove the dipstick “1” and wipe it clean.
d. Insert the dipstick “1” completely for a cor-
rect measurement and remove it again.
e. Check that the oil level indicated on the
dipstick “1” is between the upper mark “a”
and the lower mark “b”.
1
2
1
New
2
1
Drain bolt “2”
27 N·m (2.7 kgf·m, 20 lb·ft)
Engine oil quantity (without oil fil-
ter replacement)
1.5 L (1.59 US qt, 1.32 Imp.qt)
T
R
.
.
a
b
1