Yaesu WIRES-X HRI-200, Инструкция по эксплуатации

Страница: 76 / 107

76
WIRES-X Software
Main Menu
Voice CH
Allows you to set the voice channel operating information.
Modulation ..................................Displays “Digital” or “Analog” depending on the “Operation mode” setting.
Frequency ...................................Enter the frequency in units of MHz.
SQL code ....................................Enter the SQL information. The selectable value differs depending on the “Modulation” setting.
<For an analog operation>
NoTone ................................Does not use any tone types of SQL such as CTCSS and DCS
ToneSQL ..............................Uses the CTCSS tone SQL function
Selecting this option allows you to select the tone frequency from 67.0Hz to 254.1Hz
DCS ..................................... Uses the DCS code SQL function
Selecting this option allows you to select the code from 023 to 754.
FM Narrow Deviation ...........Select this option when the radio wave type is narrow-band FM.
<For a digital operation>
“DSQ” will appear and OFF or a code from 001 to 126 can be selected.
Power .........................................Set the transmission output of the transceiver used for the voice channel.
Tip The setting is valid only with a transceiver compatible with the HRI-200 control mode.
Offset ..........................................Enter the offset value for “Frequency” in units of MHz.
Tip If the transceiver is compatible with the HRI-200 control mode, the information is set on the transceiver
automatically.
Reverse ......................................Put a check-mark to transmit at the operating frequency and receive at the offset frequency
(the default value).
Remove the check-mark to receive at the operating frequency and transmit at the offset
frequency (Normally, the setting is the same as the mobile transceiver).
Tips • The setting is valid only with a transceiver compatible with the HRI-200 control mode.
• For a repeater operation, put a check-mark since the transmitting/receiving relationship is opposite to a
mobile transceiver.
Hide frequency settings ..............Put a check-mark to temporarily hide your node operating information from the node list on the
WIRES-X server.
Preset search channel
Allows you to set the preset search channel operating information. For details, refer to “Setting the preset search channel”
(page 34).
Updating the active lists
The information displayed in the 3 windows on the left side of the
main screen can be updated to the latest version.
Select “Refresh list” from the “File” menu to read the latest
information from the WIRES-X server and display in the windows.
Tip If you repeat this procedure many times at short intervals, the
information may not be changed.