53
How to Use
Advanced Operations
4
In the “Volume” area, click
[◄]
or
[►]
of “MIC LEVEL”
In the “Audio” area, the top of the waveform will move up/down.
When adjusting, make sure that the wave amplitude stays within the dotted lines.
Tip
You can also adjust by dragging the slider in the bar.
●
Adjusting the output sound volume
1
From the “View” menu, click “Audio adjustment”
The “Audio adjustments” window will appear.
2
In the “Graph select” area, click
[Start]
[Start]
will change to
[Displaying]
.
3
From another FM analog transceiver (such as VX-8D or FT1DR), transmit the #1 DTMF tone
4
On the node transceiver, check the input sound
5
In the “Test tone” area, click
[Start]
A test tone is transmitted from the node transceiver, and in the “Volume” area, the “OUTPUT” indicator bar will appear.
[Start]
will change to
[Transmitting
]
6
In the “Volume” area, click
[◄]
or
[►]
of “SP LEVEL”
Adjust the audio to a similar volume level to the sound you checked in step 4 making sure there is no distortion or abnormal
sound.
Tip
You can also adjust by dragging the slider.
7
In the “Test tone” area, click
[Transmitting]
Transmission from the node transceiver will be stopped.
[Transmitting]
will change to
[Start]
.
