39
How to Use
Advanced Operations
Important Room Operating Considerations
• Inform node station users who connect to your node, to limit their QSO individual transmissions to less than three minutes in
duration. There is a 3-minute timer on the HRI-200 that will interrupt a continuous transmission of a node that exceeds this time
duration. Even during the transmission, the timer will forcibly cut off the node transmission causing the voice communication to be
interrupted.
• Inform station users who connect to your node, that a longer-than-usual-time duration is required to exchange QSO contact
direction. Since the voice is repeated via an Internet connection, time lag will inevitably occur. If you transmit a response too
quickly after another node finished transmitting a message, your node may remain in the transmission status.
• When open squelch of the connected node station occurs, or a signal from an unknown local station is present while WIRES-X is
operating, all of the nodes connected to the room will remain in transmission status; this can be a nuisance to the users. Should
this happen, the node owner can temporarily disable the connection of the node station repeating the signal that is causing trouble
(See page 41).
• When operating a room, the owner should monitor the situation as necessary to stop any nodes causing trouble.
• The quality of the Internet connection, the number of connected nodes, and strain on the computer may cause the audio quality to
degrade and the WIRES-X software to be unstable.
• Please understand that YAESU assumes no responsibility for any interference experienced between users.
Convenient functions
The WIRES-X software enables users to configure room operation in a variety of functions.
●
Detailed setting of your room
From the “View” menu, clicking “Room-Info” displays the “MyRoom information”.
The information displayed differs depending on the room operation style (open/closed/GM).
[Open room]
[Closed room]
[GM room]
<Universal>
Status .........................................Operations style (open/closed/GM) and news data publishing method
User ID .......................................Access code of your room for digital stations
DTMF ID .....................................Access code of your room for analog stations
Activity ........................................Number of nodes currently connected (activity number)
Room name ................................The room name specified via the “Round QSO room settings” screen from the “Settings” menu
