Yaesu VX-6E, Руководство по эксплуатации

Страница: 65 / 111

VX-6E O
PERATING
M
ANUAL
63
timer expiration at the power level stored in that memory channel; it is NOT necessary for
the incapacitated person to press the
PTT
switch.
In the Continuous mode , when the
VX-6E
receives the CTCSS tone pair which is stored
in the Receiving Pager Code Memory (configured via Set Mode Item 45:
PAG.CDR PAG.CDR
PAG.CDR PAG.CDR PAG.CDR ) on
the frequency which is stored in Memory Channel “ EAI EAI
EAI EAI
EAI ” for more than five seconds, the
radio will automatically transmit (with maximum microphone gain) continuously , until
the EAI timer expiration, at the power level stored in that memory channel; it is NOT
necessary for the incapacitated person to press the
PTT switch.
Furthermore, if your call sign is stored in the radio and enabling the CW identifier via Set
Mode Item 14:
CW ID CW ID
CW ID CW ID
CW ID , the radio will transmit your callsign on the air when the EAI
feature is first engaged by the remote page, and every 10 minutes thereafter. The “callsign”
ID can be changed to any desired sequence of characters, such as a name. After sending
the callsign or name, the radio will repeatedly transmit three tones for a user-defined
period of time (between 1 and 30 minutes). The callsign or name will be transmitted every
10 minutes.
The Emergency Automatic ID (EAI) Feature requires that you (1) store the CTCSS Tone
Pair into the Receiving Pager Memory (see page 60 for procedure), and (2) store the
desired
UHF coordination frequency into Memory Channel “ EAI EAI EAI EAI EAI ” (see page 34 for pro-
cedure).
Selecting the EAI mode and its Transmit Time
1. Press the [ F/W
] key, then press the [
0
(
SET
)] key to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 24: EAI.TMR EAI.TMR EAI.TMR EAI.TMR EAI.TMR .
3. Press the [ 0
(
SET
)] key momentarily to enable adjustment of
this Set Mode Item.
4. Rotate the
DIAL
knob to select the desired EAI mode (Interval
EAI “ INT INT INT INT INT ”or Continuous EAI “ CON CON CON CON CON ”) and its transmit time ( 1 1 1 1 1
-
10 10
10 10
10
,
15 15
15 15
15
,
20 20
20 20
20
,
30 30
30 30
30
,
40 40
40 40
40
, and
50 50
50 50
50
minutes).
5. Press the PTT switch to save the new setting and exit to normal operation.
Activating the EAI feature
1. Press the [ F/W
] key, then press the [
0
(
SET
)] key to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 23:
EAI EAI
EAI EAI
EAI
.
3. Press the [ 0
(
SET
)] key momentarily to enable adjustment of
this Set Mode Item.
4. Rotate the DIAL knob to select “ ON ON ON ON ON ” (thus activating the EAI
feature).
5. Press the PTT switch to save the new setting and exit from the
E
MERGENCY
F
EATURE
E
MERGENCY
A
UTOMATIC
ID
(
EAI
)
F
EATURE