Yaesu VX-6E, Руководство по эксплуатации

Страница: 54 / 111

VX-6E O
PERATING
M
ANUAL
52
P
ROGRAMMABLE
(
B
AND
L
IMIT
)
M
EMORY
S
CAN
(
PMS
)
This feature allows you to set sub-band limits for either scanning or manual VFO opera-
tion. For example, you might wish to set up a limit (in North America) of 144.300 MHz to
148.000 MHz so as to prevent encroachment into the SSB/CW “Weak Signal” portion of
the band below 144.300 MHz. Here’s how to do this:
1. Set the radio to the VFO mode by pressing the [ V/M
(
DW
)
MT
] key, if necessary.
2. Using the techniques learned earlier, store (per the above concept) 144.300 MHz into
Memory Channel #
L1 L1 L1 L1 L1
(the “L” designates the Lower sub-band limit).
3. Likewise, store 148.000 MHz into Memory Channel # U1 U1 U1 U1 U1 (the “U” designates the
Upper sub-band limit).
4. Press and hold in the [ BAND
(
SCN
)
BND DN
] key for one sec-
ond, and (while holding the [ BAND
(
SCN
)
BND DN
] key in)
rotate the DIAL knob to select the desired PMS frequency pair
(
PMSxx PMSxx
PMSxx PMSxx
PMSxx
), then release the [ BAND
(
SCN
)
BND DN
] key.
5. Releasing the [ BAND
(
SCN
)
BND DN
] key to initiates the Pro-
grammable (Band Limit) Memory Scan; the Memory Channel
number will be replaced by “
Pxx Pxx Pxx Pxx Pxx .” Scanning and tuning will now be limited within
the just-programmed range.
6. 50 pairs of Band Limit memories, labeled L1 L1 L1 L1 L1
/
U1 U1 U1 U1 U1 through L50 L50 L50 L50 L50 / U50 U50 U50 U50 U50 are available.
You therefore can set upper and lower operation limits in multiple segments on a
number of bands, if you like.
7. To exit from PMS operation, press the [ V/M
(
DW
)
MT
] key.
Please be sure only to store limit frequencies which are on the same band
and set to the same frequency steps in both the upper and lower frequency
limit memories.
S
CANNING