Yaesu VX-6E, Руководство по эксплуатации

Страница: 32 / 111

VX-6E O
PERATING
M
ANUAL
30
CTCSS/DCS B
ELL
O
PERATION
During CTCSS Decode or DCS operation, you may set up the VX-6E such that a ringing
“bell” sound alerts you to the fact that a call is coming in. Here is the procedure for
activating the CTCSS/DCS Bell:
1. Set the transceiver up for CTCSS Decode (“Tone Squelch”) or DCS operation, as
described previously.
2. Adjust the operating frequency to the desired channel.
3. Press the [
F/W
] key, then press the [
0
(
SET
)] key to enter the Set mode.
4. Rotate the DIAL knob to select Set Mode Item 8: BELL BELL BELL BELL BELL .
5. Press the [ 0
(
SET
)] key momentarily to enable adjustment of
this Set Mode Item.
6. Rotate the DIAL knob to set the desired number of rings of the
Bell. The available choices are “
1 1 1 1 1
,” “
3 3 3 3 3
,” “
5 5 5 5 5
,” or “
8 8 8 8 8
” rings,
“
CONT CONT CONT CONT CONT
” (continuous ringing), or “
OFF OFF OFF OFF OFF
.”
7. Press the PTT switch momentarily to save the new setting and exit to normal opera-
tion.
When you are called by a station whose transceiver is sending a CTCSS tone or DCS code
which matches that set into your Decoder, the Bell will ring in accor-
dance with this programming. When the CTCSS/DCS Bell is acti-
vated, the “
” icon will appear at the upper right corner on the
LCD.
CTCSS/DCS O
PERATION