Yaesu VX-3R, Руководство по эксплуатации, Страница: 97 / 132

VX-3R O
PERATING
M
ANUAL
95
TX B
ATTERY
S
AVER
The VX-3R also includes a useful Transmit Battery Saver, which will automatically lower
the power output level when the last signal received was very strong. For example, when
you are in the immediate vicinity of a repeater station, there generally is no reason to use
the High Power output in order to achieve full-quieting access to the repeater. With the
Transmit Battery Saver, the automatic selection of Low Power operation conserves battery
drain significantly.
To activate the Transmit Battery Saver:
1. Press and hold in the [
TXPO
] key for one second to enter the Set mode.
2. Rotate the
DIAL
knob to select Set Mode Item 73:
SAVETX SAVETX
SAVETX SAVETX SAVETX
.
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO
] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to set this Set Mode Item to “
ON ON
ON ON ON
” (thus
activating the Transmit Battery Saver).
5. When you have made your selection, press the PTT switch to save the new setting and
exit to normal operation.
D
ISABLING THE
BUSY I
NDICATOR
Further battery conservation may be accomplished by disabling the BUSY indicator while
receiving a signal. Use the following procedure:
1. Press and hold in the [
TXPO
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 16:
BSY.LED BSY.LED
BSY.LED BSY.LED BSY.LED
.
Note : Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Press the [ TXPO
] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to set this Set Mode Item to “
OFF OFF OFF OFF OFF
” (thus
disabling the BUSY lamp).
5. When you have made your selection, press the PTT switch to save the new setting and
exit to normal operation.
M
ISCELLANEOUS
S
ETTING