
VX-3R O
PERATING
M
ANUAL
60
P
REFERENTIAL
M
EMORY
S
CAN
The
VX-3R
also allows you to set up a “Preferential Scan List” of channels which you can
“flag” within the memory system. These channels are designated by a blinking “
X
” icon
when you have selected them, one by one, for the Preferential Scan List.
When you initiate memory scanning, the scan begins on a channel with the blinking “
X
”
icon appended; only those channels bearing the blinking “
X
” icon will be scanned. If you
initiate scanning on a channel that does not have the blinking “
X
” icon appended, you will
scan all channels including those with the blinking “
X
” icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1. Recall the Memory Channel, which you wish to add to the Preferential Scan List.
2. Press and hold in the [
TXPO
] key for one second to enter the Set mode.
3. Rotate the
DIAL
knob to select Set Mode Item 54:
MRSKIP
MRSKIP
MRSKIP
MRSKIP
MRSKIP
.
Note
: Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
4. Press the [
TXPO
] key momentarily to enable adjustment of this
Set Mode Item.
5. Rotate the
DIAL
knob to select “
ONLY
ONLY
ONLY
ONLY
ONLY
.”
6. When you have made your selection, press the
PTT
switch to
save the settings and exit to normal operation.
To initiate Preferential Memory Scan:
1. Press the [
V/M
] key momentarily to enter the Memory Recall mode, if you are not
using memories already.
2. Rotate the
DIAL
to select any channel which has a blinking “
X
”
icon appended to the channel number.
Note
: Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Press and hold in the [
BAND
] key for one second, and rotate the
DIAL
knob while holding in the [
BAND
] key, to select the de-
sired Memory Scan mo2de.
ALL CH
ALL CH
ALL CH
ALL CH
ALL CH
: The scanner sweeps all Memory channels.
TAG1
TAG1
TAG1
TAG1
TAG1
: The scanner sweeps only those Memory channels with the same first digit of
the alpha/numeric tag as the first channel on which scanning started.
TAG2
TAG2
TAG2
TAG2
TAG2
: The scanner sweeps only those Memory channels with the same first and sec-
ond digits of the alpha/numeric tag as the first channel on which scanning started.
BAND
BAND
BAND
BAND
BAND
: The scanner sweeps only those Memory channels which are memorized on
the same operating band as the first channel on which scanning started.
PMS-X
PMS-X
PMS-X
PMS-X
PMS-X
: The scanner will sweep frequencies within the currently-selected PMS fre-
S
CANNING
M
EMORY
S
CANNING
Содержание VX-3R
Страница 29: ...VX 3R OPERATING MANUAL 27 REPEATER OPERATION NOTE...
Страница 127: ...VX 3R OPERATING MANUAL 125 NOTE...