
VX-3R O
PERATING
M
ANUAL
46
M
EMORY
M
ODE
(
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
)
To enable the alpha-numeric Tag (label) display again, just repeat the above procedure,
rotating the
DIAL
knob to select “
ALPHA
ALPHA
ALPHA
ALPHA
ALPHA
” in step 5 above.
You may set up some memory channels to have their frequencies displayed,
while others may be set to have their Name Tag displayed. The selection within
Set Mode Item 49: MR DSP is not applied to
all
memory channels at once.
M
EMORY
O
FFSET
T
UNING
Once you have recalled a particular memory channel, you may easily tune off that channel,
as though you were in the “VFO” mode.
1. With the
VX-3R
in the “MR” (Memory Recall) mode, select the desired memory chan-
nel.
2. Press the [
F/W
] key, then press the [
V/M
] key to activate the
“Memory Tuning” feature. The Memory Channel number will
be replaced by “
tun
tun
tun
tun
tun
.”
3. Rotate the
DIAL
knob, as desired, to tune to a new frequency.
The synthesizer steps selected for VFO operation on the current band will be the steps
used during Memory Tuning.
Note
: Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
4. If you wish to return to the original memory frequency, just press the [
V/M
] key mo-
mentarily.
5. If you wish to store a new frequency set during Memory Tuning, just press and hold in
the [
F/W
] key for 1/2 seconds, per normal memory storage procedure. The micropro-
cessor will automatically set itself to the next-available clear memory location, and
you then press [
F/W
] again to lock in the new frequency.
1) If you want to replace the original memory contents with those of the new
frequency, be sure to rotate the DIAL knob to the original memory channel
number!
2) Any required CTCSS/DCS changes, or repeater-offset modifications, must be done
before storing the data into the new (or original) memory channel location.
L
ABELING
M
EMORIES
Содержание VX-3R
Страница 29: ...VX 3R OPERATING MANUAL 27 REPEATER OPERATION NOTE...
Страница 127: ...VX 3R OPERATING MANUAL 125 NOTE...