
VX-3R O
PERATING
M
ANUAL
40
T
ONE
C
ALLING
(
1750 H
Z
)
If the repeaters in your country require a 1750-Hz burst tone for access (typically in Eu-
rope), you can set the
MONI
switch to serve as a “Tone Call” switch instead. To change the
configuration of this switch, we again use the Set Mode to help us.
1. Press and hold in the [
TXPO
] key for one second to enter the Set mode.
2. Rotate the
DIAL
knob to select Set Mode Item 47:
M
M
M
M
M
/
T-CL
T-CL
T-CL
T-CL
T-CL
.
Note
: Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Press the [
TXPO
] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the
DIAL
knob to select “
T-CALL
T-CALL
T-CALL
T-CALL
T-CALL
” on the display.
5. Press the
PTT
switch to save the new setting and exit to normal
operation.
To access a repeater, press and hold in the
MONI
switch for the time specified by the
repeater owner/operator. The transmitter will automatically be activated, and a 1750-Hz
audio tone will be superimposed on the carrier. Once access to the repeater has been gained,
you may release the
MONI
switch, and use the
PTT
switch for activating the transmitter
thereafter.
CTCSS/DCS/EPCS O
PERATION
Содержание VX-3R
Страница 29: ...VX 3R OPERATING MANUAL 27 REPEATER OPERATION NOTE...
Страница 127: ...VX 3R OPERATING MANUAL 125 NOTE...