Yaesu VX-3R Скачать руководство пользователя страница 45

VX-3R O

PERATING

 M

ANUAL

43

S

TORING

 I

NDEPENDENT

 T

RANSMIT

 F

REQUENCIES

 

(

“O

DD

 S

PLITS

”)

All memories can store an independent transmit frequency, for operation on repeaters with
non-standard shift. To do this:

1. Store the receive frequency using the method already described under MEMORY

STORAGE (it doesn’t matter if a repeater offset is active).

2. Turn to the desired transmit frequency, then press and hold in the [

F/W

] key for 1/2

second.

3. Within five seconds of releasing the [

F/W

] key, rotate the 

DIAL

 knob to select the

same memory channel number as used in step “1” above.

Note

: Do not forget to pull the 

DIAL

 knob to rotate the 

DIAL

 knob.

4. Press and hold in the 

PTT

 switch, then press the [

F/W

] key once more momentarily

while holding the 

PTT

 switch in (this does not key the transmitter).

Whenever you recall a memory which contains indepen-
dently-stored transmit and receive frequencies, the

” indication will appear in the display.

M

EMORY

 R

ECALL

1. While operating in the VFO mode, press the [

V/M

] key to enter

the Memory mode.

2. Rotate the 

DIAL

 knob to select the desired channel.

Note

: Do not forget to pull the 

DIAL

 knob to rotate the 

DIAL

knob.

3. If you press the [

F/W

] key momentarily, then rotate the 

DIAL

 knob, the memory chan-

nel will be selected in 10 channels per step.

4. To return to the VFO mode, press the [

V/M

] key.

You may change the step of the fast channel selection mode ([F/W] key +
DIAL knob) via Set Mode Item 51: MRFSTP. See page 114 for details.

M

EMORY

 M

ODE 

(

R

EGULAR

 M

EMORY

 C

HANNEL

 O

PERATION

)

M

EMORY

 S

TORAGE

Содержание VX-3R





































































































































Отзывы: