
VX-3R O
PERATING
M
ANUAL
58
M
EMORY
S
CANNING
Memory scanning is also easy to initiate:
1. Set the radio to the Memory mode by pressing the [
V/M
] key, if necessary.
2. Press and hold in the [
BAND
] key for one second, and rotate the
DIAL
knob
while
holding in the
[
BAND
]
key
to select the de-
sired Memory Scan mode. Available selections are
ALL CH
ALL CH
ALL CH
ALL CH
ALL CH
,
TAG1
TAG1
TAG1
TAG1
TAG1
,
TAG2
TAG2
TAG2
TAG2
TAG2
,
BAND
BAND
BAND
BAND
BAND
, and
PMS-X
PMS-X
PMS-X
PMS-X
PMS-X
.
ALL CH
ALL CH
ALL CH
ALL CH
ALL CH
: The scanner sweeps all Memory channels.
TAG1
TAG1
TAG1
TAG1
TAG1
: The scanner sweeps only those Memory channels with the same first digit of
the alpha/numeric tag as the first channel on which scanning started.
TAG2
TAG2
TAG2
TAG2
TAG2
: The scanner sweeps only those Memory channels with the same first and
second digits of the alpha/numeric tag as the first channel on which scanning
started.
BAND
BAND
BAND
BAND
BAND
: The scanner sweeps only those Memory channels which are memorized on
the same operating band as the first channel on which scanning started.
PMS-X
PMS-X
PMS-X
PMS-X
PMS-X
: The scanner will sweep frequencies within the currently-selected PMS fre-
quency pair. See page 61 for details.
Note
: Do not forget to pull the
DIAL
knob to rotate the
DIAL
knob.
3. Release the [
BAND
] key to initiate scanning.
4. As with VFO scanning, the scanner will halt on any signal encountered that is strong
enough to open the squelch; it will then resume scanning accord-
ing to the Scan-Resume mode set previously. When there are no
memory channels corresponding to the selected Memory Scan
mode, the “
MS ERR
MS ERR
MS ERR
MS ERR
MS ERR
” notation will appear on the display.
5. To cancel scanning, press the
PTT
switch or [
V/M
] key.
S
CANNING
Содержание VX-3R
Страница 29: ...VX 3R OPERATING MANUAL 27 REPEATER OPERATION NOTE...
Страница 127: ...VX 3R OPERATING MANUAL 125 NOTE...