Yaesu VX-3R, Руководство по эксплуатации, Страница: 89 / 132

VX-3R O
PERATING
M
ANUAL
87
The speed at which the DTMF digits are sent can be changed. Two speed levels are avail-
able: Low (10 digits per second) and High (20 digits per second: default). To toggle be-
tween Low and High speed, use the following procedure:
1. Press and hold the [ TXPO
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 29:
DT SPD DT SPD DT SPD DT SPD DT SPD
.
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO
] key to enable adjustment of this Set Mode
Item.
4. Rotate the
DIAL
knob to select the desired speed (“
50MS 50MS
50MS 50MS
50MS
”: High
speed or “
100 MS 100 MS
100 MS 100 MS
100 MS
”: Low speed).
5. Press the
PTT
switch to save the new setting and exit to normal operation.
You can also set a longer delay between the time your transmitter is keyed and the first
DTMF digit is sent. To set the delay time, use the following procedure:
1. Press and hold the [ TXPO
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 27:
DT DLY DT DLY DT DLY DT DLY DT DLY
.
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO
] key to enable adjustment of this Set Mode
Item.
4. Rotate the
DIAL
knob to select the desired delay (
50 50
50 50 50
/
250 250
250 250 250
/
450 450
450 450 450
/
750 750
750 750
750
/
1000MS 1000MS
1000MS 1000MS
1000MS
).
5. Press the
PTT
switch to save the new setting and exit to normal operation.
DTMF A
UTODIALER
DTMF O
PERATION