Yaesu VX-3R, Руководство по эксплуатации, Страница: 85 / 132

VX-3R O
PERATING
M
ANUAL
83
FRG
(
“F
RIENDLY
R
ADIO
G
ROUP
”
)
MODE
You may access other Internet Link Systems (including WIRES
™
in the FRG mode) that
use a DTMF string for access.
P
ROGRAMMING THE
FRG
CODE
Load the DTMF tones which you wish to use for Internet-link access into an Internet
Memory Register. For purposes of this example, we will use “#(F)1101D” as the access
code (the “#” key is denoted by the letter “F”).
1. Press and hold in the [ TXPO
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 41:
INT.SEL INT.SEL
INT.SEL INT.SEL
INT.SEL
.
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [
TXPO
] key to enable adjustment of this Set Mode
Item.
4. Rotate the
DIAL
knob to select the DTMF Memory register
(“
F 0 F 0
F 0 F 0 F 0
” - “
F63 F63
F63 F63 F63
”) into which you wish to store the access code.
5. Press the [
V/M
] key momentarily. The first digit will blink.
6. Rotate the DIAL knob to select “
F FF
FF
” (representing DTMF “#”: the
first digit of the DTMF string).
7. Press the [ V/M
] key momentarily to accept the first digit and
move to the second digit of the DTMF string.
8. If you make a mistake, press the [ BAND
] key to backspace the
cursor, then re-enter the correct letter or number.
9. Repeat steps 6 through 8 until you have completed the access
code (“F(#)1101D”).
10. If you wish to attach an alpha/numeric name “Tag” to the Internet
Memory, proceed to the next step; otherwise press the PTT switch
to save the settings and exit to normal operation.
11. Press the [
V/M
] key twice. The DTMF Memory register number
blinks.
12. Press the [ MODE
] key momentarily (the “
-----ALPHA
ALPHA
ALPHA ALPHA ALPHA-----
” notation
appear in the display for 2 seconds), then press the [
V/M
] key
momentarily to enable programming of the name tag.
13. Rotate the DIAL knob to select the first digit of the desired label.
14. Press the [ V/M
] key to move to the next character.
15. If you make a mistake, press the [ BAND
] key to back-space the
cursor, then re-enter the correct letter, number, or symbol.
16. Repeat steps 13 through 15 to program the remaining letters, numbers, or symbols of
the desired label. Six characters may be used in the creation of a label.
I
NTERNET
C
ONNECTION FEATURE