Yaesu VX-3R, Руководство по эксплуатации, Страница: 78 / 132

VX-3R O
PERATING
M
ANUAL
76
Selecting the EAI mode and its Transmit Time
1. Press and hold in the [ TXPO
] key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 31:
EAI.TMR EAI.TMR EAI.TMR EAI.TMR EAI.TMR
.
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO
] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the
DIAL
knob to select the desired EAI mode (Interval
EAI “
INT INT
INT INT
INT
” or Continuous EAI “
CON CON
CON CON
CON
”) and transmit time (
1 1
1 1
1
-
10 10
10 10
10
,
15 15
15 15 15
,
20 20
20 20 20
,
30 30
30 30 30
,
40 40
40 40 40
, and 50 minutes).
5. Press the
PTT
switch to save the new setting and exit to normal operation.
A
CTIVATING THE
EAI
FEATURE
1. Press and hold in the [
TXPO
] key for one second to enter the Set mode.
2. Rotate the
DIAL
knob to select Set Mode Item 30:
EAI EAI
EAI EAI EAI
.
Note : Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the [ TXPO
] key momentarily to enable adjustment of this
Set Mode Item.
4. Rotate the DIAL knob to select “
ON ON
ON ON ON
” (thus activating the EAI
feature).
5. Press the PTT switch to save the new setting and exit to normal operation (with EAI
feature “ON”).
When the EAI feature is activated, the “
EAI EAI EAI EAI EAI
” notation and the Band
Number (or memory channel number) will appear alternately in the
Memory Channel Number Display Slot of the display.
To disable the EAI feature, just repeat above procedure, rotating the DIAL knob to select
“
OFF OFF OFF OFF OFF
” in step “4” above.
The VX-3R will ignore the EAI feature when the (1) the squelch is open, (2)
there is an incoming signal on the operating frequency, (3) the operating
frequency is the same as the frequency which is stored in the Memory Chan-
nel “EAI,” or (4) a VHF frequency is stored in Memory Channel “EAI.”
E
MERGENCY
A
UTOMATIC
ID
(
EAI
)
F
EATURE
E
MERGENCY
F
EATURE