Revision 1.1
WebSwitch™ Users Manual
2.4.11 Script Tab (Model XRDI-WS3P only)
WebSwitch Plus™ can be used to run simple custom programs written in a language similar to BASIC.
This page is used to load and execute these programs. Before it can be loaded to WebSwitch Plus™, a
script must first be written as a .txt file. The file must then be uploaded to WebSwitch Plus™. The
maximum size of script that can be uploaded to the device is 2K bytes. Notes on writing a basic program
for WebSwitch Plus™ can be found in
Appendix G: Basic Scripts.
BASIC Script
This field displays the .txt file that is uploaded to WebSwitch Plus™. Text displayed in this screen
cannot be edited. In order to edit any script, it must be rewritten in the .txt file and uploaded to the
unit again.
Interpreter Status
This field displays whether the program is continuing to run, has stopped or finished, or if there are
errors contained in the script. If there are errors in the script, the line on which the error occurred is
displayed.
Xytronix Research & Design, Inc.
59
Figure 2.4o- Script Tab
