Revision 1.1
WebSwitch™ Users Manual
Extvar1 can be set and cleared by entering the following requests into a web browser or by configuring
on and off buttons to appear on the control page for extvar0:
http://192.168.1.2/state.xml?extvar1=1
http://192.168.1.2/state.xml?extvar1=0
Testing and Debugging:
Note that a copy of the BASIC interpreter for Windows is also available on our website for the use of
testing and debugging. The device will only acknowledge errors as it runs. This means that if a path of
the script is not encountered, errors may still exist. The Windows version of the interpreter, however, will
check for errors before the script is run. Note also that the PRINT function is available for use with the
Windows version of the BASIC interpreter. The interpreter on the device, however, will not recognize this
command.
Note: The script will be restarted by submitting any of the setup pages or by power cycling the unit.
Xytronix Research & Design, Inc.
104
