Revision 1.1
WebSwitch™ Users Manual
The following parameters are available when the Set Time is set to
Manually:
Date
This field is used to enter the current date. The date is entered by first selecting the correct month
and year by using the left and right arrows at the top of the calender. The single arrows (< and >)
change the month and the double arrows (<< and >>) change the year. Once the current month and
year are displayed, the date should be entered by moving the mouse pointer over the correct day
and clicking the (left) mouse button to highlight that date.
Time (24 Hour Format)
Enter the time as HH:MM:SS. (HH represents hours in 24-hour format [00-23], MM represents
minutes [00-59], SS represents seconds [00-59].)
The following parameters (5-8) are available when Set Time is set to Sync with NTP server:
Server Name/IP Address
This field is used to specify the name or IP address of the NTP server. If a name is specified, a
working DNS server address must be entered into the
Network
settings. If the IP address is
specified, it should be entered in the following format
aaa.bbb.ccc.ddd
where each of the letters
represents a number between
0
and
255
. This field can be up to 40 characters. There is no default
value for this field.
Xytronix Research & Design, Inc.
38
Figure 2.4f- Date/Time Tab-NTP Server Synchronization
