Revision 1.1
WebSwitch™ Users Manual
2.4.10 Events Scheduler Tab (Model XRDI-WS3P only)
Events can be programmed to turn the outlets on and off at specific times. Up to 50 events can be
created. Each event can occur one time or multiple times.
A list of all scheduled events and information about each event is displayed in a table. Events can be
sorted according to each column, in ascending or descending order. The following is displayed.
-
Events Scheduler: On/Off
: Turns scheduled events on or off.
On
is selected by default.
-
Current Date/Time
: Displays the current date and time as specified in the
Date/Time
setup tab.
-
Event #
: The number and name of events are listed.
-
Start Date/Time
: The start date and time (displayed in 24-hour time) of the event is listed here.
-
Period
: The duration of the event.
-
Count
: The number of times the event will occur.
-
Outlet #
: Which of the two outlets, if any, will be affected by the event.
-
Outlet Action
: If either of the two outlets have been programmed to take action, that action will
be displayed here.
-
Pulse/Reboot
: The outlets can be programmed to pulse/reboot upon the trigger of the event,
and the pulse duration will be displayed.
-
Next Occurrence
: The date and time of the event's next occurrence will be displayed. If the
event has already occurred, the event will be listed as “Inactive” here.
The events are color coded to indicate their current state. Gray events have not been set up. Green
events are active and will occur sometime in the future. Red events have been temporarily disabled by
the disable event action. Yellow events have already occurred and are not scheduled to happen in the
future.
Xytronix Research & Design, Inc.
55
Figure 2.4m- Events Scheduler Tab
