Revision 1.1
WebSwitch™ Users Manual
Step 5:
Select the radio button labeled "Use the following IP address" and type in the IP address
192.168.1.50
.
Type in a subnet mask of
255.255.255.0
.
No need to change the default gateway
field. Click OK to accept the new settings.
Note: If “Use the following IP address” is already selected, the values need to be recorded, then re-
entered once the IP address of WebSwitch™ is successfully changed.
2.3.3 Open Configuration Web Page
Once the network is set up, open the setup page as described in section 2.4. If the setup pages are not
accessible, verify that WebSwitch™ is powered on and that the LINK light is illuminated. Check all
network connections and settings. Another way to check communications is to ping WebSwitch™ (from
the command prompt by typing
ping
{WebSwitch IP address}
).
Xytronix Research & Design, Inc.
24
