Revision 1.1
WebSwitch™ Users Manual
Appendix A: Restoring Factory Default Settings
In the event that the IP address or passwords are forgotten, WebSwitch™ may be restored to its original
factory default settings. To do this, first remove the power from the unit. Next, carefully insert a thin
object (such as a toothpick) through the small hole in the back of the unit to press the small button
located inside the unit. When the object is inserted, a tactile feel can be detected as the button is
pressed. While holding the button down, apply power and wait for about 10 seconds. After about 10
seconds, release the button. Now all settings will be back to the original factory defaults. CAUTION: DO
NOT USE METAL OBJECTS FOR THIS FUNCTION.
Xytronix Research & Design, Inc.
83
Figure Appendix A.1 - Restore Factory Defaults
