Xylem WTW Alyza IQ PO4, Руководство по эксплуатации

Страница: 39 / 172

Alyza IQ PO4 Commissioning
39
ba76201d03 05/2020
Mounting the
housing
5 Attach the rail mount bracket to two suitable horizontal rail pipes with the
aid of the four clamping devices. Each clamping device consists of a
groove bar (1), a terminal strip (2), two long hexagon head screws (3),
two nuts (4) and two spring washers (5). Adjust the clamping devices to
the rail pipes. To compensate for any possible differences of the upper
and lower rail pipe diameters, 2 further terminal strips and 8 washers
(thickness 2 mm) are provided with the construction set. If necessary,
insert these items between the rail and supporting pipes as shown in
Abb. 3-9,
 38 so that the rail mount bracket is in a vertical position.
Note that both supporting pipes must stand on the ground!
The weight of the Alyza IQ is supported by the rail mount bracket
standing on the ground. The rail prevents the Alyza IQ from falling
over.
figure 3-10Mounting the housing
1 Upper C-rail
2 Lower C-rail
6 Mount the housing by hooking the C-rails (1 and 2) fixed on its rear side
into the retaining hooks of the rail mount bracket.
2
1