Xylem WTW Alyza IQ PO4, Руководство по эксплуатации

Страница: 14 / 172

Overview Alyza IQ PO4
14
ba76201d03 05/2020
1.3.2 Measuring unit
Abb. 1-5,  14 shows the open measuring unit (without front cover).
How it functions The measuring unit is controlled and supplied with DC voltage by the control unit
ACM. Communication with the IQ S
ENSOR
N
ET
takes place via the
IQ S
ENSOR
N
ET
cable, as with all other sensors.
In the overflow vessel, sample that is fresh, filtrated, and nearly free of air bub-
bles is quasi continuously provided for the measurements. The filtration unit
(FM/PC - available as an accessory) in conjunction with the filtration pump (in-
strument variant) provides an optimally prepared sample.
A syringe pump in the measuring unit makes all the liquids move (sample, re-
figure 1-5 Open measuring unit (without front cover)
1 Tube fastening
2 Control unit ACS
3 Locking device of the MultiPort valve (
MPV
)
4 Receptacle for the MultiPort Valve (
MPV
) with tubes
5 Contact that detects whether the measuring unit is closed with the
front cover.
(If there is the risk of condensation of air humidity in an open
measuring unit, a warning is triggered.)
6 Status LED of the measuring unit
(The status of the status LED is visible through a light duct at the
outside of the front cover.)
7 Waste tube of the measuring unit
8 ChemBags, suspended from a supporting rod
9 Photometer unit
2
3
4
8
9
5
6
1
7
Before opening: Drain the system!
ES: Antes de abrir: vaciar el sistema!
¡