Xylem WTW Alyza IQ PO4, Руководство по эксплуатации

Страница: 36 / 172

Commissioning Alyza IQ PO4
36
ba76201d03 05/2020
Assembling the
bracket
Proceed as follows to install the housing on the rail:
figure 3-7 Connecting the supporting pipes with the cross pipes
1 Protective plug
2 Square supporting pipe
3 Square cross pipe
4 Angle bracket
1 Press the plastic protective plugs (1) into the upper ends of both square
supporting pipes (2).
2 Connect both supporting pipes with each other using the two square
cross pipes (3). For each joint, use two angle brackets (4), three short
hexagon head screws, two large plain washers, three spring washers
and three locknuts as shown in Abb. 3-7,
 36.
3 4
1
2