Xerox WorkCentre C226, Руководство системного администратора, Страница: 86 / 216

2-36 Xerox WorkCentre C226 System Administration Guide
Key Operator Programs
Enable/Disable Settings
"Enable/Disable settings" consists of the following programs:
• Disabling deletion of job programs
• Disabling of bypass-tray in duplex copy
• Disabling of covers mode
• Disabling of auto paper selection
Disabling deletion of job programs
This program is used to prevent stored programs from being replaced or deleted.
When this program is set, storing of job programs is also disabled.
Disabling of bypass-tray in duplex copy
(Only when an optional duplex module/2-tray unit is installed)
This program is used to disable the use of the bypass tray when making duplex cop-
ies.
The bypass tray is sometimes used to feed heavy paper. Loading heavy paper in the
duplex module/2-tray unit may cause a misfeed or failure. If heavy paper is frequently
used, it is recommended that you enable this program.
Disabling of covers mode
This program is used to prevent selection of the COVERS mode.
Disabling of auto paper selection
This program is used to prevent automatic paper selection. When automatic paper
selection is disabled, the copier will not automatically select a paper tray containing
paper that matches the size of the original placed on the document glass or in the
DADF.