Xerox WorkCentre C226, Руководство системного администратора, Страница: 177 / 216

Programming, Editing, and Deleting F-Code Memory Boxes
Xerox WorkCentre C226 System Administration Guide 6-31
6. Use the numeric keys (0 through 9) to enter a sub-address (max. 20 digits).
• The characters " " and "#" cannot be used in a sub-address.
• If you enter an incorrect digit, press the [C] key and re-enter the correct digit.
• If you do not wish to enter a passcode, proceed to step 9.
7. To set a passcode, touch the [PASS CODE] key.
A slash (/) appears after the sub-address.
If you enter an incorrect digit, press the [C] key and re-
enter the correct digit.
8. Use the numeric keys to enter a passcode (max. 20 digits).
• In addition to numbers, the characters " " and "#" can be used in a pass-
code.
• If you make a mistake, press the [C] key to clear the mistake and re-enter the
correct digits.
F-Code Memory Box / Polling Memory
No.001
Exit Next
Ok Cancel
Enter The Sub Address / Pass Code Via The 10-Key Pad,Then Press [Ok].
214341434
Pass Code
Sub Address / Pass Code
Ok Cancel
e 10-Key Pad,Then Press [Ok].
Pass Code
F-Code Memory Box / Polling Memory
No.001
Exit Next
Ok Cancel
Enter The Sub Address / Pass Code Via The 10-Key Pad,Then Press [Ok].
214341434/351212
Pass Code
Sub Address / Pass CodE