Xerox WorkCentre C226, Руководство системного администратора, Страница: 165 / 216

Storing, Editing, and Deleting Auto Dial Keys and Programs
Xerox WorkCentre C226 System Administration Guide 6-19
NOTES: If you cannot edit or delete a one-touch key
If you attempt to edit or delete a one-touch key in the following situations, a warning
message will appear and editing/deletion will not be possible.
• The one-touch key you wish to edit or delete is currently being used for
transmission or is used in a currently stored transmission job (including a timer
transmission).
• The one-touch key is included in a group key. (See “Editing and Deleting Group
Keys” on page 6-21.)
• The one-touch key is included in a group of end receiving machines for an F-code
relay broadcast operation. (See “Editing and Deleting a Memory Box” on page 6-
37.)
• The one-touch key is included in a program. (See “Editing and Deleting Programs”
on page 6-26.)
• If the key is being used for a transmission currently in progress or a stored
transmission, cancel the transmission or wait until it is completed and then change
or delete the key. If the key is included in a group, delete the key from the group
and then change or delete it.
Storing a Group Key
Up to 100 destinations can be stored in a group key.
To program a group key, follow steps 1 through 3 beginning on page 6-9, touch the
[GROUP] key in step 4, and then follow these steps.
NOTE: Only one-touch key destinations can be stored in a group key. If you wish to store a
destination that is not programmed in a one-touch key, first program the destination in
a one-touch key and then store it in the group key.
1. Follow the same steps 1 through 7 of “Storing One-Touch Keys” (page 6-11) to
enter a [GROUP NAME], [INITIAL], and [INDEX].
* In step 1 on page 6-11, touch the [GROUP NAME] key instead of the [NAME]
key.
2. Touch the [ADDRESS] key.
ame Group-Digital Document
X User 2 Address
me