Xerox WorkCentre C226, Руководство системного администратора, Страница: 151 / 216

Fax Mode (Condition Settings Screen)
Xerox WorkCentre C226 System Administration Guide 6-5
[SUB ADDRESS] Touch this key to enter a sub-address and passcode when using F-code transmission.
[ADDRESS
REVIEW]
When performing a broadcast transmission, touch this key to check your selected des-
tinations. The selected destinations will appear and any unneeded destinations can be
deleted.
[SCANNER/FAX] This key appears when the network scanner option is installed. Touch the key to
switch between the scanner screen and the fax screen. When the fax screen appears,
"FAX" is highlighted. When the scanner screen appears, "SCANNER" is highlighted.
[SPECIAL
MODES]
Touch this key to set one of the following special functions:
• Timer transmission
• Polling
• Dual page scan
• Program
• Memory box
Two-sided
original icon
display
Icons appear here when you touch the [ORIGINAL] key and select two-sided scan-
ning. The icons can be touched to open function selection screens.
[ORIGINAL] Touch this key when you wish to manually set the size of the original to be scanned or
scan both sides of the original.
[RESOLUTION] Touch this key to change the resolution setting for the original to be scanned. The
selected resolution setting will be highlighted above the key. The initial factory setting
is [STANDARD].
[EXPOSURE] Touch this key to change the exposure setting for the original to be scanned. The
selected exposure setting will be highlighted above the key. The initial factory setting is
[AUTO].
Special function
icon display
When a special function such as polling or dual page scan is selected, a special func-
tion icon appears here. (For more information refer to your Xerox WorkCentre C226
User Guide.)
6
7
8
9
10
11
12
13
14