Xerox WorkCentre C226, Руководство системного администратора, Страница: 82 / 216

2-32 Xerox WorkCentre C226 System Administration Guide
Key Operator Programs
Exposure adjustment
Use this program to lighten or darken copies in the automatic exposure mode. The
factory setting is "5". "1" indicates lighter density and "9" indicates darker density on
the touch panel.
Rotation copy setting
If this program is set, the image of originals will rotate when the orientation of the orig-
inals does not match that of the copy paper.
(Rotation copy will function only if the auto paper select or auto image mode has been
selected.)
NOTE: For copying from A5 or 5-1/2" x 8-1/2" size originals onto A5R or 5-1/2" x 8-1/2"R
paper, this program must be set.
Add or change extra preset ratios
When using AB sizes, there are normally five preset enlargement ratios and five pre-
set reduction ratios. When using inch sizes, there are normally four preset enlarge-
ment ratios and four preset reduction ratios.
This program allows you to add two more preset enlargement ratios and two more pre-
set reduction ratios. This program also allows you to change a preset ratio.
NOTE: Only an added preset ratio can be changed.
Initial margin shift setting
Set the initial margin shift value with this program.
The value can be set from 0 mm to 20 mm in 1 mm increments or from 0" to 1" in 1/8"
increments.
If an optional duplex module/2-tray unit and duplex bypass/inverter unit are not
installed, the value for the reverse side (side 2) is not displayed.