Xerox WorkCentre C226, Руководство системного администратора, Страница: 183 / 216

Programming, Editing, and Deleting F-Code Memory Boxes
Xerox WorkCentre C226 System Administration Guide 6-37
Editing and Deleting a Memory Box
1. Press the [CUSTOM SETTINGS] key and then touch the [ADDRESS CONTROL]
key (refer to steps 1 and 2 on page 6-9).
2. Touch the [F-CODE MEMORY BOX] key (refer to step 2 on page 6-29).
3. Touch one of the memory box keys ([POLLING MEMORY], [CONFIDENTIAL], or
[RELAY BROADCAST]) on the amend/delete line (lower line) (see step 3 on
page 6-30).
4. Touch the memory box key that you wish to edit or delete.
• The memory box edit/delete screen appears.
• ( ) mark indicates that data has been stored.
• A memory box cannot be edited or deleted when data is stored in the box.
5. Touch the keys as needed to edit or delete the information.
• Edit a memory box in the same way as you programmed it.
• To delete a memory box, touch the [DELETE] key at the upper right of the
screen (a message will appear asking you to confirm the deletion).
• The print PIN must be entered to edit or delete a confidential memory box.
• A memory box cannot be edited or cleared while it is being used for transmis-
sion.
Memory Box / Amend/Delete
Select Memory Box To Amend/Delete.
Polling Memory
Marketing Group Fax Information
Exit
F-Code Memory Box / Polling Memory
No.005
Sub Address
Box Name Marketing Group
Unlimited
22233311/351212
Polling Times
Exit Delete