Xerox WorkCentre C226, Руководство системного администратора, Страница: 74 / 216

2-24 Xerox WorkCentre C226 System Administration Guide
Key Operator Programs
Disabling of duplex
This program is used to disable duplex printing when the duplex module malfunctions.
If this program is set, only one-sided printing can be performed.
Disabling of inverter
Use this program when you need to prohibit the inverter function or when the duplex
bypass/inverter unit has failed. When the program is turned on, pages are only output
face-down to the centre tray of the machine. Duplex printing is also not possible (only
one-sided printing is possible).
Disabling of stapler
This program is used to disable stapling when the stapler unit of the saddle stitch fin-
isher malfunctions.
Disabling of optional paper drawer
This program is used to disable use of the stand/1 tray unit, stand/3 tray unit or duplex
module/2-tray unit when it malfunctions.
NOTE: If the duplex module/2-tray unit is disabled, automatic two-sided printing cannot be
performed.
Disabling of high capacity feeder
Use this program when you wish to prohibit use of the high capacity feeder or when it
has failed.
Disabling of shifter
Use this program when you need to prohibit the shifter function in the centre tray or
when the shifter has failed. When the program is turned on, the offset feature that off-
sets sets of copies or printed pages in the centre tray will not function.