Xerox WorkCentre C226, Руководство системного администратора, Страница: 126 / 216

5-2 Xerox WorkCentre C226 System Administration Guide
Scan Kit
Options required to use the network scanner function
• Scan kit
• Memory
To use the network scanner function in colour up to 300 dpi or B/W mode up to
600 dpi
For printer controller: Add one 256-MB module
To use the network scanner function in colour or B/W modes up to 600 dpi
For printer controller: Add one 256-MB module and one 128-MB module, or two
256-MB modules
For image memory: Add one 128-MB module*, or one 256-MB module
* This memory configuration enables scanning of standard size originals without
restriction. However, it may not be possible to scan non-standard size originals
when all of the following conditions are met:
(1) The X dimension of the original is greater than 422 mm (16-3/8 inches) and
the Y dimension of the original is greater than 289 mm (11-3/8 inches).
(2) The resolution is 600 x 600 dpi.
(3) Full colour scanning.
To scan using the above conditions, increase the image memory from 128 MB to 256
MB.