Xerox WorkCentre C226, Руководство системного администратора, Страница: 122 / 216

4-6 Xerox WorkCentre C226 System Administration Guide
Data Security Kit
Clear All Memory
Use this setting when you wish to manually clear data stored in the unit's memory and
on the hard disk.
NOTE: We recommend that you execute this program before turning off the power.
Touch the [CLEAR ALL MEMORY] key. The following screen appears to confirm your
selection.
[Clear screen 1]
[Clear screen 2]
Example: When the hard disk drive is installed.
NOTE: If you wish to cancel after data clearing has begun
Touch the [CANCEL] key. When the [CANCEL] key is touched, the key operator code
entry screen appears. Enter your key operator code with the numeric keys. Note that
data that has already been cleared at the time you enter your 5-digit key operator code
will not be restored. Data already cleared will be lost. When data clearing is canceled,
the machine will power off temporarily and then automatically power back on.
No Yes
Clear All Memory?
(Reserved Job Data Will Be Cleared.)
• To return to the "SECURITY SET-
TINGS" screen, touch the [NO] key.
• When the [YES] key is touched, the
following screen appears.
Cancel
100 % 50 % 0 %
Clearing All Memory. Auto Reboot Is
Implemented After Clearing.
Progress Status
• Each time the top bar reaches all the
way to the right, the bottom bar,
which indicates data clearing
progress, advances 1%. (When the
bottom bar reaches 100%, data
clearing is finished.)
• When the data has been cleared, the
power briefly turns off and then auto-
matically turns on again.