Xerox WorkCentre C226, Руководство системного администратора, Страница: 181 / 216

Programming, Editing, and Deleting F-Code Memory Boxes
Xerox WorkCentre C226 System Administration Guide 6-35
4. Touch the [OK] key.
You will return to screen of step 2 and the entered print PIN will appear.
5. To exit, touch the [EXIT] key.
To program another memory box, touch the [NEXT] key.
Touching the [EXIT] key returns you to the screen of
step 3 on page 6-30.
Touching the [NEXT] key returns you to the screen for
programming a new memory box (the screen of step 4
on page 6-30).
Setting for F-Code Relay Broadcast Memory Boxes (Recipient)
Program the end receiving machines to which document data received in the F-code
relay broadcast memory box will be transmitted when your machine is a relay
machine.
NOTES: • Up to 30 end receiving machines (30 one-touch keys or group keys) can be
programmed. If you attempt to program more than this number, a message will
appear and programming will not be possible.
• Only destinations that have been programmed in auto dial keys (one-touch keys
or group keys) can be selected. If you need to include a destination that has not
been programmed in an auto dial key, first program it in a one-touch key (page 6-
11) and then program the destination as an end receiving machine.
1. Touch the [RELAY BROADCAST] key in step 3 of “Programming an F-Code
Memory Box” on page 6-29 and store a box name, sub-address, and passcode.
2. Touch the [RECIPIENT] key.
The address selection screen appears.
Exit Next
Sub Address
Box Name Fax Information
123456/987654
Recipient