Xerox WorkCentre C226, Руководство системного администратора, Страница: 140 / 216

5-16 Xerox WorkCentre C226 System Administration Guide
Scan Kit
NOTE: If you attempt to edit or delete a programmed destination in the following situation, a
warning message will appear and editing/deletion will not be possible.
The destination is included in a group.
If the destination is being used for a current transmission, cancel the transmission or
wait until it is completed and then edit or delete the destination. If the destination is
included in a group, delete the destination from the group and then edit or delete the
destination.
Storing Sender Information (Scan to E-mail)
To store the sender information (Sender Name, E-mail Address) that is displayed
when the recipient receives your e-mail, click "Sender" in the menu frame and then
click "Add". Information for up to 20 different senders can be stored. Select a sender
from the stored senders using the touch panel of the machine when you send an
image. The selected sender appears in the sender column of the recipient's e-mail
software program.
NOTE: If you do not select a sender when sending an image, the default sender information
stored with the key operator program "Default sender set" is automatically sent.
1. Click "Sender" in the menu frame of the Web page.
2. Click "Add" under "New Sender".
The sender programming screen appears.
Enter the name and e-mail address of the new sender. Be sure to click "Submit" after
entering this information.