Xerox Versant 3100 Press Скачать руководство пользователя страница 75

Страница: 75 / 170

The raised portion of the piece at the other end should be facing up, and on top
of the cork pad on the tray bottom.

7. Load the envelopes SEF on top of the plastic inserts, with the flaps closed and facing

down.

Note

The flaps should always be down and positioned along the front of the tray.

8. Adjust the paper guides against the stock.

9. Close the paper tray and confirm the new settings at the print server.

10. Run your print job.
11. Upon completion of your print job, remove the envelope stock and the envelope

supply kit components from the tray.

12. Place the envelope supply kit components into storage.
13. Store the remaining envelopes in their original packaging.

Loading Envelopes in Tray 5 (Bypass)

Load envelopes in Tray 5 in either the short edge feed (SEF) or long edge feed (LEF)
direction.

Loading Envelopes in Tray 5 in the SEF Direction

When loading envelopes SEF, ensure the flaps are closed and face down, and postion
the flaps along the front of the tray.

5-37

Xerox

Versant

3100 Press

User Guide

Paper and Media

Содержание Versant 3100 Press











































































































































































Результаты поиска

Содержание Versant 3100 Press

Отзывы:

Xerox Versant 3100 Press, Руководство пользователя, Страница: 75 / 170

Результаты поиска

Содержание Versant 3100 Press

Отзывы: