Xerox Versant 3100 Press Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 170

Xerox Versant 3100 Press Скачать руководство пользователя страница 40

General Paper Loading Guidelines

• Fan paper before loading it in the paper tray.
• Do not overfill the paper trays. Do not load paper above the indicated maximum fill

line in the tray.

• Adjust the paper guides to fit the paper size.
• If excessive jams occur, use paper or other approved media from a new package.
• Do not print on label media after a label has been removed from a sheet.
• Use only paper envelopes.
• Print envelopes 1-sided only.

Unsupported Media

Some paper and other media types can cause poor output quality, increased paper jams,
or damage the press. Do not use the following:

• Rough or porous paper
• Inkjet paper
• Paper that is business-card size
• Paper that is folded or wrinkled
• Paper that is curled more than 0.47 in. / 12 mm
• Paper with cutouts or perforations
• Stapled paper
• Damp paper
• Thermal or heat-transfer paper
• Envelopes with windows, metal clasps, side seams, or adhesives with release strips
• Padded envelopes

Note

In addition to the above list, there may be other media that is not recommended or
supported. For details, please contact your local Xerox representative.

Xerox

®

Versant

®

3100 Press

5-2

User Guide

Paper and Media

«
...
38
39
40
41
42
...
»

Содержание Versant 3100 Press











































































































































































Отзывы:

Нет отзывов